PAC 91 Printer Adapter Cable
The PAC 91 makes it possible to connect the optical output of Fluke test tools directly to widely-used parallel printer interfaces. The PAC91 converter has an optical RS-232 (serial) input and a parallel data (Centronics) output.

Features

• Easy connection: Optical connector hooks directly to Fluke test tools with an optical interface
  
• Standard, 25-pin connector for Centronics printer cable
  
• Battery-powered for field use
  
• Auto Power-off mode helps conserve batteries
  
• "Busy" and "Power" indicator LED's
  
• 9600 baud communication speed keeps up with fast printers
  

Specifications

Optical Input: Optical RS-232, 9600 baud, 8 bits, no parity, 1 stop bit, Xon/Xoff handshake.
Output: Centronics (TTL levels,), 8 bit parallel with handshake. DB-25 female connector.
Battery: Alkaline 9V, IEC 6LR61 (NEDA 1604). Battery lifetime >20 hrs. at room temperature.
Power switch settings: Off / Auto off / On. 'Auto off' mode gives auto power-down 5 minutes after last data transfer.
Dimensions: 123 x 76 x 30 mm (4.85 x 3 x 1.2 inch); cable length: 30 cm (1 ft).
Environmental: Temperature range 0oC to +50oC (operating), -40oC to +70oC (storage).
Warranty: 1 year
Supported instruments: ScopeMeter test tools, power harmonics analyzers and graphical multimeters.

Ordering Information

PAC91 Printer Adapter Cable, optical to Centronics.