FLUKE - 725Ex CALIBRAÇÃO DE PROCESSO

Voltage DC	30.000 V - 0.02%+ 2 counts (upper display) 30.000 V - 0.02%+ 2 counts (lower display) 100.00 mV - 0.02%+ 2 counts -10.00 mV to 75.00 mV - 0.025 % + 1 count (via TC connector)
Current DC	24.000 mA - 0.02%+ 2 counts
Resistance	0.0 to 400.0 OHM 0.1 OHM (4-wire), 0.15O (2- and 3-wire) 401 to 1500 OHM 0.5 OHM (4-wire), 1O (2- and 3-wire) 1500 to 3200 OHM 1 OHM (4-wire), 1.5O (2- and 3-wire
Frequency	2,0 a 1000,0 CPM - 0,05% + 1 count 1,0 a 1100,0 Hz - 0,05% + 1 count 1,00 a 10,00 kHz - 0,05% + 1 count Sensitivity - 1 V peak-to-peak-minimum
Pressure	Accuracy - from 0.025% of range using any of 8 intrinsic safe pressure modules. (for detailed specifications refer to pressure modules in options and accessories) Modules available for differential, gage, vacuum, absolute, dual and high pressure.

SOURCE ACCURATY

Voltage DC	100,00 mV - 0,02% + 2 counts 10,000 V - 0,02% + 2 counts -10,00 mV to 75,00 mV - 0,025% + 1 count (via TC connector)
Current DC	24,000 mA (Source) - 0,02% + 2 counts 24,000 mA (Simulate) - 0,02% + 2 counts
Resistance	15,0 to 400,0 OHM - 0,15 OHM (exc. current 0,15 a 0,5 mA), 0,1 OHM (exc. current 0,5 a 2 mA) 401 to 1500 OHM - 0,5 OHM (excitation current 0,05 a 0,8 mA) 1500 to 3200 OHM - 1 OHM (excitation current 0,05 a 0,4 mA)
Frequency	2,0 to 1000,0 CPM - 0.05% 1,0 to 1100,0 Hz - 0.05% 1,00 to 10,00 kHz - 0.25% Waveform: 5 V p-p squarewave, -0.1 V offset

RTDs AND THERMOCOUPLES

Measure Accuracy:	NI-120 - 0,2 °C PT-100 - (385) 0,33 °C PT-100 - (393) 0,3 °C PT-100 - (JIS) 0,3 °C PT-200 - (385) 0,2 °C PT-500 - (385) 0,3 °C PT-1000 - (385) 0,2 °C Resolution: 0,1 °C J: 0,7 °C / K: 0,8 °C / T: 0,8 °C / E: 0,7 °C / R: 1,8 °C / S: 1,5 °C / B: 1,4 °C / L: 0,7 °C / U: 0,75 °C / N: 0,9 °C Resolution J, K, T, E, L, N, U: 0,1 °C, 0,1 °F B, R, S: 1 °C, 1 °F
Source Accuracy:	NI-120 - 0,2 °C PT-100 (385) - 0,33 °C PT-100 (393) - 0,3 °C PT-100 (JIS) - 0,3 °C PT-200 (385) - 0,2 °C PT-500 (385) - 0,3 °C PT-1000 (385) - 0,2 °C Resolution:0,1 °C Note: Accuracy stated for 4-wire measurement. J: 0,7 °C / K: 0,8 °C / T: 0,8 °C / E: 0,7 °C / R: 1,4 °C / S: 1,5 °C / B: 1,4 °C / L: 0,7 °C / U: 0,75 °C / N: 0,9 °C Resolution J, K, T, E, L, N, U: 0,1 °C, B, R, S: 1 °C

Especifications

Ramp Functions	Source functions: Voltage, current, resistance, frequency, temperature Ramps - Slow ramp, Fast ramp, 25% step-ramp
Loop Power Function	Voltage: 12 V Accuracy: 10% Maximum current: 22 mA, short circuit protected
Step Functions	Source functions: Voltage, current, resistance, frequency, temperature Steps - 25% of range, 100% of range

SAFETY SPECIFICATIONS

Agency Approvals

ATEX II 1 G EEx ia IIB 171°C I.S. Class I, Division 1 Groups

MECHANICAL & GENERAL SPECIFICATIONS

Size	130 x 236 x 61 mm 5.188" x 9.291" x 2.402"
Weight	0.85 kg (1.874 lbs.)
Batteries	4 AA alkaline batteries
Battery Replacement	Separate battery compartment, accessible without breaking calibration seal
Side port connections	Pressure module connector